A slipcover can help you protect your recliner from animal scratches, stains, spills, and smelly things. If something spills on it, you can clean it without breaking a sweat since most are machine washable.
As you can see, buying a recliner slipcover is quite critical when you have this piece of furniture. That said, before buying, it is best to measure your recliner to ensure a precise fit.
Today, we will share with you a step-by-step recliner measurement guide for a slipcover. Let’s check it out.
How to Measure Your Recliner for a Slipcover
You place the measuring tape equally right over the arms for the precise dimension. All the sides across the recliner’s rear need measuring too.
It is best to take note of the calculation to determine the custom slipcover’s scale. You will need an additional measurement for another recliner slipcover.
The next step is to record the width of the recliner seat, followed by measuring the horizontal dimensions of the recliner at the seat’s front, rear, and center.
As you might know, the seat’s width of the chair has the largest diameter.
Before measuring the sides of the seat, you want to know the recliner seat’s length from the rear to the front edge. Moreover, it is essential to record the biggest measurement as the length of the recliner seat.
What you need to do next is to calculate your recliner chair’s back on the front side and backside in the identical way you did the box cushion.
It is best to record what you measure above prior to making a list of each element’s largest dimensions.
The following step is to measure all arms of your recliner chair from the points in which they reach the seat. It might be around the shoulder and to the stage where its arms connect to your recliner chair’s side.
Plus, it will help if you figure the length and width for the outside surface of each arm, followed by recording the biggest measurements.
What you want to do next is to take the exact dimensions of the recliner chair’s front surfaces in width and length for the gusset. Your sofa’s footrest needs measuring in length and width too.
Another important thing you want to remember is to write down the highest measurements.
To calculate the number of square inches per segment, you will multiply the length by the width of each piece of the recliner chair in inches.
Adding all totals together is needed to get the final number of fabric required in inches. And to account for any calculation inaccuracies, it is best to add 10% to the sum.
Finally, if you want to get the sum of fabric per 60-inch-wide upholstery fabric, remember to divide the number you measured above by 60.
Meanwhile, to get the sum of fabric per 54-inch-wide fabric, divide the balance by 54. If you want to convert this number to yards, multiply it by 12. You might not know this, but each fabric bolt is sold per yard.
So you have gone through the recliner measurement for a slipcover. Following these steps above, you can measure your recliner precisely.
In case you could not find any suitable sofa slipcover matching your exact measurements, it is better to buy one slightly bigger than your recliner chair. Smaller slipcovers might tear when your sofa is put in the reclined position.
Anyway, if you have any further questions, please feel free to let us know.
You might also want to read: